How to Replace a Kia Sportage Replacement Key
For many Kia models, the key contains an integrated keyless entry system. kia venga key resembles a remote control and can be changed with a brand new one from an Kia dealer or locksmith.
Key fobs might stop working due to a number of reasons, such as the battery being dead, worn-out buttons signal interference or water damage. Here are some suggestions to help you get your Kia key fob that is a replacement for the sportage again.
How do you replace the remote key or smartkey
The battery in your Kia's intelligent key will eventually need to be replaced, regardless of whether it's a remote that starts with a push button or a normal metal key that does not contain a transponder. This is especially when the car displays a message indicating that the smart or remote key has low battery power.
This is a relatively easy process. In order to replace the battery on the key fob, remove the mechanical key from the slit on the back of the key fob. Next, remove the cover. A small screw is inside the key fob, which holds the battery in the correct position. By using a small screwdriver loosen the screw and pull out the battery that was in place. Install the new battery and then close the gap on the key fob.
Test the key fob by pressing the lock/unlock buttons. It's good in case the doors lock and unlock as expected. You can now use the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or you need to complete errands in Brandon.
Note: Some key fobs (transponder chip or smart keys) may require their programming done. This requires a particular programming machine that only the dealer or automotive locksmith has access to. Other keys (non transponder metal keys) do not require programming. If you're required to reprogramme your key, you'll have to record the key code number on the tag for the key code.
How do you replace a battery?
If the Kia key fob doesn't respond when you press the lock/unlock button, it's a sign that the battery is insufficient. A low battery may also cause other problems like the check engine light flashing on or the engine not cranking. It is fairly easy to replace key fob battery with just two tools.
Be sure to turn off your vehicle and shut all doors prior to beginning. Locate the small metal or plastic piece at the bottom of your key fob and move it until a metal key slips out. You can then insert the key into the door handle of the driver to open your car.
To replace the battery inside the key fob remove the cover that covers the rear. Make use of a plastic pry tool to loosen up the latch that holds the black negative cable. Remove the old battery, and then place the new battery in a way that its "+" side faces you, and the "-", negative side is facing the fob's electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.
After the new battery has been installed, turn the key fob off and on in the ignition for a few times until the door locks cycle. Then, you can test your Kia key fob to check if it is working properly again.
How can you replace the smart key
You could have the standard keyfob or Smart Key depending on the model of Kia Sportage. The difference between the two is that the smart key has tiny mechanical key blade that is hidden inside, while the standard key fob does not. Both key fobs come with batteries that will eventually require replacing. Fortunately, it's an easy task that takes just two minutes.
Be sure to switch off your Kia, and be on a level or well-lit surface prior to when you begin. Remember that the fob contains small pieces that could be thrown off when you're not careful.
The small release button is located on the lower backside. This will either be an oval silver button or a rectangular slot. After pressing this button the mechanical key blade will come out and you can then open the key fob.
Once the key fob is removed, you can remove the old battery. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. After you've finished, your key fob should permit you to lock or unlock and start your vehicle even if it's not running.
How to replace a mechanical key
The Kia keyfob is an excellent convenience, allowing us to lock or unlock our car with just pressing a button. Like any other device like a key fob, the Kia can have issues at times. There are steps to take to resolve these issues and ensure that our key fobs are in good working order for the long run.
A dead or low-quality battery is among the most common problems. This can cause your device to stop working or work intermittently. If this happens you should replace the battery with a fresh new one.
If this isn't enough to resolve the issue Try using a standard flathead screwdriver and wedge it into the casing of the fob's plastic. Be careful not to scratch any internal components or scratch the plastic. Once the battery is removed then replace it with a new one.
Close and open the door using the mechanical key. (Every Kia fob comes with a spare mechanical key that fits into the slot). Test the key fob to confirm it's working properly. If the device isn't working, contact an authorized locksmith or dealer to help resolve the issue. To avoid a lockout in the future ensure you purchase an emergency key that will work in all of the trunk and door cylinders.